Good quality FM transmitter
Mon Dec 10 2007, 09:50 am
hi Andy I think you do not understand where to connect + and - of 9 v battery as you can see +ve terminal of 9v battery to be connected on top red point as mentioned +9v and -ve terminal to be connected to ground of circuit ie below R5 (100 ohms) i also suggest you to please gain some knowledge about circuit symbols you can visit following site
http://www.kpsec.freeuk.com/symbol.htm
http://www.kpsec.freeuk.com/symbol.htm
Sun Jan 06 2008, 07:00 pm
hey guys, if anyone is willing to help me further with building fm transmitters I'd really appreciate your help. If you can e-mail me at [email protected] I'd really appreciate it. If you have built them already that would be a great help...I might even pay you for building and sending me one with the plans !
Thu Jan 17 2008, 09:23 am
Another simplest transmitter
ajay_bhargav, pdi33 like this.
Tags Simples FM transmitterFM transmitter5V FM transmitter
Sun Nov 02 2008, 11:21 am
another tested ok
Part
Total Qty.
Description
Substitutions
C1 - 0.001uf Disc Capacitor
C2 - 5.6pf Disc Capacitor
C3,C4 - 10uf Electrolytic Capacitor
C5 - 3-18pf Adjustable Cap
R1 - 270 Ohm 1/8W Resistor 270 Ohm 1/4W Resistor
R2,R5,R6 - 4.7k 1/8W Resistor 4.7K 1/4W Resistor
R3 - 10k 1/8W Resistor 10K 1/4W Resistor
R4 - 100k 1/8W Resistor 100K 1/4W Resistor
Q1, Q2 - 2N2222A NPN Transistor 2N3904, NTE123A
L1, L2 - 5 Turn Air Core Coil
MIC - Electret Microphone
MISC - 9V Battery Snap, PC Board, Wire For Antenna
Part
Total Qty.
Description
Substitutions
C1 - 0.001uf Disc Capacitor
C2 - 5.6pf Disc Capacitor
C3,C4 - 10uf Electrolytic Capacitor
C5 - 3-18pf Adjustable Cap
R1 - 270 Ohm 1/8W Resistor 270 Ohm 1/4W Resistor
R2,R5,R6 - 4.7k 1/8W Resistor 4.7K 1/4W Resistor
R3 - 10k 1/8W Resistor 10K 1/4W Resistor
R4 - 100k 1/8W Resistor 100K 1/4W Resistor
Q1, Q2 - 2N2222A NPN Transistor 2N3904, NTE123A
L1, L2 - 5 Turn Air Core Coil
MIC - Electret Microphone
MISC - 9V Battery Snap, PC Board, Wire For Antenna
[ Edited Sun Nov 02 2008, 11:27 am ]
Fri Jan 23 2009, 12:45 am
CAN SOMEONE tell me how to MAKE RFC VK200 in home
AND how to set the TRIMMER plz........
AND how to set the TRIMMER plz........
Powered by e107 Forum System